Parat SMP parquetglue hybrid-glue

17Kg, only for finish-and mosaic parquet suitable

€5.70*/ Kilogram

€96.90* per packagaging unit

Product number: 45500002

Processing conditions:

Best between + 18 -C and 23 -C; substrate temperature min. + 15 Air temperature min. + 18°C

Not above 65% rel. humidity


Recommended trowel notch:

Mosaic and two-layer finished parquet (8 mm thick, shorter 40 cm)

TKB tooth form B2 - Consumption: approx. 750 g/ml


Short two-layer ready-made parquet elements (up to 100 cm)

TKB tooth form B3-B5 - Consumption: approx. 1100 g/ml


Two-layer ready-made parquet in plank form (up to max. 120 cm)

Three-layer finished parquet in DIelenform (up to max. 250 cm)

TKB tooth form B5-B11 - Consumption: approx. 1250 g/ml


- solvent and silicone free

- Emicode ECIR - very low emission

- Substitute for parquet adhesives with high solvent content

- odorless

- good ribbing

- universal and safe in application

- ready for use - no mixing

- water-free

- elastic through-hardening - compensates for the swelling and shrinkage of the wood

- Impact sound improvement up to 14 dB, depending on the type of parquet

- Reduction of the room sound value by over SO %


Area of application: Solvent-free one-component adhesive for the elastic bonding of mosaic parquet, two-layer and three-layer ready-to-lay parquet according to DIN EN 13489 on absorbent and non-absorbent substrates, such as cement screed, calcium sulfate (flowing) screed and on substrates filled with suitable fillers.




Product number: 45500002
EAN: 4260115028108
Weight in kg: 17
Wood is a natural product, variations in color and structure are inevitable and properties of the natural product wood. A sample therefore does not have to match the later delivery and therefore cannot convey the overall impression of a laid area. The same applies to the illustrations on this website / web shop, these are also to be equated with the representation of a sample.